Payment Type: | L/C, T/T, Western Union, Paypal |
---|---|
Min. Order: | 1 |
Model No.: E180
Item | Specification | |
Enhanced Function | Internal Virtual Time Delay Relay | Simple logic programming for the multi-functional output terminals and the digital input terminals. |
The logic results can be equivalent to the digital input terminal function, and can be output through | ||
the multi-functional output terminals | ||
Internal Timer | Two internal timers to collect timing input signals and to output timing signals. | |
The two timers can be used separately or together | ||
Internal Math | One internal 4-way math operation module for elementary arithmetic operations, numerical | |
Operation Module | magnitude judgment and integral operation | |
Communication | E100 | The control panel has a RS485 communication interface which supports standard MODBUS-RTU |
protocol | ||
E102/E180/EM60 | The control panel does not have a RS485 communication interface, and an external 485 | |
communication expansion card shall be connected. Support standard MODBUS-RTU protocol. The | ||
E180-series also support standard PROFIBUS-DP protocol (through an external E180-DP expansion | ||
card). | ||
Coder | E100 | The coder can be connected directly through the DI5 and DI6 terminals on the control panel, and |
simple closed-loop control is available through PID control. Such connection is used in undemanding | ||
situations. | ||
EM60 | The control panel does not have any interface for the coder, and a one-way high-speed pulser can be | |
extended (through DI6). | ||
E102 | The control panel only has one coder interface (DI6). | |
E180 | The control panel does not have any coder interface, and an external coder expansion card is | |
necessary. The inverter supports ABZ incremental coder, UVW incremental coder and resolver. Such | ||
connection enables high-performance VC, and can be used in situations with demanding control | ||
precision requirements. | ||
Motor | E100/E102 | Only for asynchronous motors |
E180 | For asynchronous motors and synchronous motors | |
Display | Operation Information | Given frequency, output frequency, output voltage, busbar voltage, input signal, feedback value, |
module temperature, and synchronous speed of the motor. At most 32 parameters can be displayed in | ||
cycle through the ">>" key. | ||
Fault Information | In the fault protection mode, three pieces of history fault information can be saved. Every piece | |
includes the frequency, current, busbar voltage and I/O terminal status when the fault takes place. | ||
Protection | Inverter Protection | Over-current, over-voltage, module fault protection, under-voltage, overheat, overload, external fault |
protection, EEPROM fault protection, ground protection, and default phase | ||
Inverter Alarm | Locked-rotor protection, overload alarm | |
Instantaneous Power Down | Less than 15 ms: continuous operation | |
More than 15ms: automatic restart | ||
Environment | Ambient Temperature | -10ºC~ 40ºC |
Storage Temperature | -10ºC~ 40ºC | |
Ambient Humidity | Max. 90% RH (No condensation) | |
Altitude/Vibration | Below 1000m; below 0.6g | |
Working Place | No corrosive gas, inflammable gas, oil mist or dust | |
Cooling | Force-air cooling |
Model | Brake Unit | Brake Resistance | Power (W) |
CDI-EM60G0R4S2B | Internal, Max. Current of 8A | 400 | 80 |
CDI-EM60G0R75S2B | Internal, Max. Current of 8A | 200 | 160 |
CDI-EM60G1R1S2B | Internal, Max. Current of 8A | 160 | 200 |
CDI-EM60G1R5S2B | Internal, Max. Current of 15A | 120 | 250 |
CDI-EM60G2R2S2B | Internal, Max. Current of 15A | 80 | 400 |
Model | Brake Unit | Brake Resistance | Brake Resistor Power (W) |
S2 (Single-phase 220V) | |||
CDI-E100G0R4S2B | Internal, Max. Current of 8A | 400 | 80 |
CDI-E100G0R75S2B | Internal, Max. Current of 8A | 200 | 160 |
CDI-E100G1R5S2B | Internal, Max. Current of 15A | 120 | 250 |
CDI-E100G2R2S2B | Internal, Max. Current of 15A | 80 | 400 |
T2 (Three-phase 220V) | |||
CDI-E100G0R4T2B | Internal, Max. Current of 8A | 400 | 80 |
CDI-E100G0R75T2B | Internal, Max. Current of 8A | 200 | 160 |
CDI-E100G1R5T2B | Internal, Max. Current of 15A | 120 | 250 |
CDI-E100G2R2T2B | Internal, Max. Current of 25A | 80 | 400 |
T4 (Three-phase 380V) | |||
CDI-E100G0R75T4B | Internal, Max. Current of 8A | 600 | 160 |
CDI-E100G1R5T2B | Internal, Max. Current of 8A | 400 | 250 |
CDI-E100G2R2T4B | Internal, Max. Current of 15A | 250 | 400 |
CDI-E100G3R7T4B | Internal, Max. Current of 15A | 150 | 600 |
CDI-E100G5R5/P7R5T4B | Internal, Max. Current of 40A | 100 | 1000 |
CDI-E100G7R5/P0R11T4B | Internal, Max. Current of 40A | 75 | 1200 |
CDI-E100G011/P015T4BL | Internal, Max. Current of 50A | 50 | 2000 |
CDI-E100G015/P018.5T4BL | Internal, Max. Current of 75A | 40 | 2500 |
CDI-E100G0185/P022T4 | Internal, Max. Current of 50A Connect to External CDI-BR-50 | 30 | 4000 |
CDI-E100G022T4 | Internal, Max. Current of 50A Connect to External CDI-BR-50 | 30 | 4000 |
Model | Brake Unit | Brake Resistance | Brake Resistor Power (W) |
T2 (Three-phase 220V) | |||
CDI-E180G0R4T2B | Internal, Max. Current of 10A | 350 | 160 |
CDI-E180G0R75T2B | Internal, Max. Current of 10A | 300 | 160 |
CDI-E180G1R5T2B | Internal, Max. Current of 25A | 100 | 250 |
CDI-E180G2R2T2B | Internal, Max. Current of 25A | 75 | 400 |
CDI-E180G3R7T2B | Internal, Max. Current of 40A | 45 | 600 |
CDI-E180G5R5T2B | Internal, Max. Current of 50A | 30 | 1000 |
CDI-E180G7R5T2BL | Internal, Max. Current of 75A | 20 | 1200 |
CDI-E180G011T2 | Internal, Max. Current of 50A (Connect to External CDI-BR-50) | 16 | 2000 |
CDI-E180G015T2 | CDI-BR-100 | 12 | 2500 |
CDI-E180G018.5T2 | CDI-BR-100 | 20/2 | 4000 |
CDI-E180G022T2 | CDI-BR-100 | 16/2 | 4000 |
CDI-E180G030T2 | Internal, Max. Current of 75A (Connect to External CDI-BR-50) | 13.6/2 | 6000 |
T4 (Three-phase 380V) | |||
CDI-E180G0R75T4B | Internal, Max. Current of 10A | 600 | 160 |
CDI-E180G1R5T4B | Internal, Max. Current of 10A | 400 | 250 |
CDI-E180G2R2T4B | Internal, Max. Current of 15A | 250 | 400 |
CDI-E180G3R7/P5R5T4B | Internal, Max. Current of 25A | 150 | 600 |
CDI-E180G5R5MT4B | Internal, Max. Current of 40A | 100 | 1000 |
CDI-E180G5R5/P7R5T4B | Internal, Max. Current of 40A | 100 | 1000 |
CDI-E180G7R5/P011T4B | Internal, Max. Current of 40A | 75 | 1200 |
CDI-E180G011MT4B | Internal, Max. Current of 50A | 50 | 2000 |
CDI-E180G0011/P015T4BL | Internal, Max. Current of 50A | 50 | 2000 |
CDI-E180G015/P018.5T4BL | Internal, Max. Current of 75A | 40 | 2500 |
CDI-E180G018.5/P022T4 | Internal, Max. Current of 50A (Connect to External CDI-BR-50) | 30 | 4000 |
CDI-E180G022/P030T4 | Internal, Max. Current of 75A (Connect to External CDI-BR-50) | 30 | 4000 |
CDI-E180G030/P037T4 | Internal, Max. Current of 50A (Connect to External CDI-BR-50) | 20 | 6000 |
CDI-E180G037/P045T4 | CDI-BR-100 | 16 | 9000 |
CDI-E180G045/P055T4 | CDI-BR-100 | 13.6 | 9000 |
CDI-E180G055/P075T4 | CDI-BR-100 | 20/2 | 12000 |
CDI-E180G075/P093T4 | CDI-BR-200 | 13.6/2 | 18000 |
CDI-E180G093/P110T4 | CDI-BR-200 | 20/3 | 18000 |
CDI-E180G110/P132T4 | CDI-BR-200 | 20/3 | 24000 |
CDI-E180G132/P160T4 | CDI-BR-200 | 20/4 | 36000 |
CDI-E180G160/P185T4 | CDI-BR-400 | 13.6/4 | 45000 |
CDI-E180G185/P200T4 | CDI-BR-400 | 13.6/5 | 45000 |
CDI-E180G200/P220T4L | CDI-BR-400 | 13.6/5 | 54000 |
CDI-E180G250/P280T4L | CDI-BR-400 | 13.6/6 | 54000 |
CDI-E180G280/P315T4L | CDI-BR-400 | 13.6/6 | 54000 |
CDI-E180G315/P355T4L | CDI-BR-400 | 13.6/6 | 54000 |
CDI-E180G355/P375T4L | CDI-BR-400 | 13.6/6 | 54000 |
CDI-E180G375T4L | CDI-BR-400 | 13.6/6 | 63000 |
CDI-E180G400T4L | CDI-BR-600 | 13.6/7 | 63000 |
CDI-E180G400T4L | CDI-BR-600 | 13.6/7 | 72000 |
CDI-E180G500T4L | CDI-BR-600 | 13.6/8 | 72000 |
CDI-E180G500T4L | CDI-BR-600 | 13.6/8 | 81000 |
CDI-E180G630T4L | CDI-BR-600 | 13.6/9 | 81000 |
CDI-E180G200T4L | CDI-BR-600 | 13.6/9 | 90000 |
CDI-E180P250T4L | 2 CDI-BR-400 | 13.6/10 | 18000 |
Product Categories : Frequency Inverter