Product Description Model NO.: CDRA series Output Type: Single Switch Mode: PWM Control Voltage of Power Supply: Low Voltage Variable-Frequency Drive Nature of DC Power: Voltage Variable-Frequency Drive Brand: Delixi Power Control: Power Control Input Terminal Digital Output: External Reset Terminals Power Interface: Positive 5V, Gnd, FM Emergency Stop: Suspend The Output of Soft Starter Repeat Starting: Restart Transport Package: Carton and Plywood Origin: Hangzhou, China Application: High-performance Transducer, Three Phase Transducer, General Transducer, Single-phase Transducer, High Frequency Converter Transducer Principle of Work: Power Control Input Terminal Main Circuit Type: Voltage Link of Transformation: AC-DC-AC Variable-Frequency Drive Function: Simple Type Main Circuit: AC Main Circuit Power Input Relay Output: Bypass Contactor Control Terminals RS 485: RS485 Positive Signals Start/Stop Time: Digital Setting Starting Voltage: Voltage, Starting Voltage Could Digital Setting Trademark: DELIXI Specification: CE HS Code: 8504409990

Delixi CDRA Series Three Phase Soft Starter (11KW)

Detail
-Controled by high perfermance 32bit DSP
-Perfect current output 
-13kinds of set frequencies 
-RS485 communication
-Good programmable terminal
-Two-way switchable analog input(0~10V/4~20mA)
-Two-way high-accuracy  switchable analog input(0~10V/4~20mA)
-Suitable for textile industry length stop function
-Suitable for supply water  sleep mode
-Monitoring value time-sharing alternate show
-CE approved

Parameter Sheet
-overcurrent, overload, overheating,
-three phase
-lightload, external proble

Soft Starter Model	Rated Frequency (kW)	Rated Current (A)	Auxiliary Circuit Breaker Model (QF)	Auxiliary Bypass Contactor Model (KM)	Primary Line Specifications
CDRA011T4	11	25	CDM1-63L/32	CJ20-25	6mm 2  cable
CDRA015T4	15	32	CDM1-63L/40	CJ20-40	10mm 2 cable
CDRA018T4	18.5	37	CDM1-63L/50	CJ20-40	10mm 2 cable
CDRA022T4	22	45	CDM1-63L/63	CJ20-63	16mm 2 cable
CDRA030T4	30	60	CDM1-100L/80	CJ20-63	25mm 2 cable
CDRA037T4	37	75	CDM1-100L/100	CJ20-100	35mm 2 cable
CDRA045T4	45	90	CDM1-225L/125	CJ20-100	35mm 2 cable
CDRA055T4	55	110	CDM1-225L/160	CJ20-160	35mm 2 cable
CDRA075T4	75	152	CDM1-225L/180	CJ20-160	35mm 2 cable
CDRA093T4	93	176	CDM1-225L/200	CJ20-250	30*3mm 2 copper busbar
CDRA110T4	110	210	CDM1-400L/250	CJ20-250	30*3mm 2 copper busbar
CDRA132T4	132	253	CDM1-400L/315	CJ20-400	30*4mm 2 copper busbar
CDRA160T4	160	300	CDM1-400L/350	CJ20-400	30*4mm 2 copper busbar
CDRA200T4	200	380	CDM1-400L/400	CJ20-400	40*4mm 2 copper busbar
CDRA250T4	250	480	CDM1-630L/630	CJ20-630	40*5mm 2 copper busbar
CDRA320T4	320	600	CDM1-800H/700	CJ40-800	40*5mm 2 copper busbar
CDRA400T4	400	750	CDM1-800H/800	CJ40-1000	50*5mm 2 copper busbar
CDRA450T4	450	892	CDM1-1250/1000	CJ40-1000	50*5mm 2 copper busbar
CDRA500T4	500	930	CDM1-1250/1250	CJ40-1000	50*5mm 2 copper busbar
CDRA600T4	600	1100	CDM1-1250/1250	CJ40-1000	50*5mm 2 copper busbar

  
Technical specification

Classfiy		Terminal Mark	Terminal Name	specification
Main Circuit		R.S.T	AC main circuit power input	Connect 3 phase AC through breaker
		U.V.W	Softer output terminal	Connect three-phase asynchronous
		L21.L22.L23	Externalbypass contactor special terminal	Connect bypass contactor
Power Control		13	Power control input terminal	Connect AC 220V 50Hz
		14
		12	Earthing terminal	Earth Connection
Control  Circuit	Relay  Output	1	Bypass contactor control terminals	Start after the completion of the closure Capacity:AC 220V 5A
		2
		3	Break contactor output terminals	Failure occurs (Way could set) Capacity:AC 220V 5A
		4
		5	Multifunction output terminals	action method could programmable Capacity:AC 220V 5A
		6
	Digital Output	7	External reset terminals	Failure occurs,external terminals reset signal
		8	Urgency stop control terminals	External terminals control emergency stopping signal
		9	External control stop termials	External control,STOP and COM closed,RUN and COM closed means effective,or STOP means effective
		10	External control run terminals
		11	External common terminal	Digital input common treminals
	RS 485	A	RS485 Positive signals	RS485 terminal
		B	RS485 Negative signals
	Power  Interface	Positive 5V		Power
		GND	GND terminal	GND
		GND		0-20ma,4-20ma,analog quantity output signal, choose throug program
		FM	Current signal output terminal

Technical specification

Operation	operational control	keyboard /external terminals/RS485
	start up type	current-limiting/voltage/heavy load
	start/stop time	digital setting
	start delay time	digital setting
	emergency stop	suspend the output of soft starter
	limiting current	current-limiting and heavy load,starting current operate below this value
	starting voltage	Voltage,starting voltage could digital setting
	underloading control	find some trouble like belt trips
	repeat starting	restart
	Bug output	touch output,AC220V,1A.DC 30V 1A
	multifunction relay output	start delayed ,start,operation,stop,restart
	analog output	0-20MA,4-20MA for choosing
defencive function	soft starter protection	over current,overload, overheating, unbalanced three-phase, light load, external problem etc
	soft starter alarm	emergency stopping,light load,restart etc
Display	operation informatin	get ready for state,start delayed,stop etc
	parameter protection	protect the setting parameter isnot change
Service conditions	use category	AC-53b
	Rated insulation voltage	660V
	Rated impulse withstand voltage Uimp	4KV
	operation frequency	≤12 times/hour
	protection level	CDRA011T4-CDRA055T4:IP20 CDRA075T4-CDRA600T4:IP00
	Rated limited short-circuit current	CDRA055T4:6KA   CDRA160T4:12KA CDRA320T4:20KA CDRA600T4:48KA
Environment	environment temperature	-0°C to 40°C
	store environment	-20°C to 65°C
	environment humidity	max 90% RH
	height/vibrate	below 1000m,5.9m/s2(=0.6g)below
	Application site	non-corrosive gases, flammable gas, oil mist live dust etc
Type of cooling		nature wind cooling

WHY CHOOSE US?

Q1.Are you manufacturer or trading company?
A.We are the only manufacturer of  electrical products.
Welcome to visit our factory at any time.
 
Q 2. what's the payment term? 
A. We accept T/T, L/C,  WESTERN UNION, PAYPAL etc.
 
Q 3. What's the delivery time ? 
A. Normal model 1-3days,because we have ability to do the stock.
For big order,it takes about 15-20days.
 
Q 4. What is the standard of package? 
A. Export standard package or special package according to customer requirement
.
Q 5. what kind of product quality your factory offer? 
A. We are top 3 from Chinese market.We offer top quality to help client to get more market.
 
Q 6. Do you accept OEM business?
A. We do OEM .

Q 7.Which market do you already sell? 
A.We already ship to  Middle East, Asia, Russia ,Afria etc. 
 
Q8. what kind of certificate you have ? 
A.We have ISO9001,  CE, CCC,etc.
 About us:
Hangzhou Delixi, following the international state-of-art technology, has set up a high-tech eco-industrial park with the investment of 2 billion Yuan, and the park is equipped with domestically leading processing and inspection equipment.Moreover, the company has 1000 sets production equipment and 100 production lines;And also it has set up technological center to focus on the development of high-tech products and improvement of technologies and processes.In 2007, its frequency converter is rated as a high-tech product, and the frequency converter company is recognized as the provincial high-tech company.Its transmitter is developed by cooperation with ABB Company.The automatic surveillance system for substation is one of the Top 10 science and technology planning project of Xihu District in 2007. We are dedicated to providing efficient and stable technical solutions for customers and continuously improving the efficiency of energy use.  Our company, by applying the internationally advanced variable frequency control technology and the actual needs of frequency inverters. In resent years, more than 10 products have won the National patent. Now we have developed and manufactured inverter E180 universal type inverter,E00/E102 series inverters,CDI9200 inverter,CDi9800 vector type inverter. Compared with the old frequency inverters ,E series inverters are improved substantially besides its optimized structure and appearance. Its powerful built-in function many better fulfill the needs of different industries. Besides frequency inverters, we also develop and manufacture the welding machines. including MMA welding machine, TIG welding machine, TIG/MMA welding machine,CO2 MIG welding machine, air plasma cutter, AC/DC TIG wielding machine, submerged arc welding machine, etc. All of our products are widely applied in aviation, shipbuilding, bridges, constructions, automobiles, pressure vessels and industries of mineral and metal processing.  
Exhibition:





















































 

Contact us if you need more details on Soft Starter. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Motor Soft Starter、Electric Soft Starter. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Frequency Inverter